Skygloss

Book Service
Get Certified

for more details

Send Us a Message

FAQ

Everything You Need to Know About SkyGloss

Clearcoat is the essence of your paint finish and is the top outer layer that completes the vehicles exterior finish. It is the most important layer of your paint finish. It is what gives it its beauty, luster and shine along with all the protective chemical and UV resistance it needs to protect against the elements. It is in the constant state of wearing down the day it drives off the dealership lot, just like tires or brake pads. Without a healthy thick clearcoat, your paint finish is completely compromised and will disintegrate the layers underneath all the way down to metal. Keeping it healthy and thick is the answer to a paint finish that will last forever.

A few decades ago, polishing made sense. Paint systems were thicker. Clearcoat was deeper. You could afford to remove material to fix a problem because there was enough foundation underneath to support it. That is no longer today’s reality.

Over the last 20 years, manufacturers have reduced clearcoat thickness by an average of nearly 100 microns. That thickness was protection. That thickness was margin. That thickness was freedom — freedom to wash, detail, and correct without compromising integrity.

Today, most vehicles — even luxury vehicles — are thinner than ever. When you polish modern paint, you’re not just refining it. You’re permanently reducing what little protection remains.

Polishing will never disappear. It still has its place for those select vehicles that can afford to lose material.
But 90% of today’s vehicles cannot afford that loss.

SkyGloss, completely solves this problem by simply building versus cutting. Not only does that solve the integrity issue, but it provides a better more robust permanent finish that will keep your vehicle factory forever.

Paint correction is the art of freshening up the paints clearcoat layer. So technically, yes, but we use more advanced, innovative techniques than traditional paint correction methods. The problem with traditional methods is that they can make your surface look fresh and new, but at the expense of cutting down an already thinning paint finish. Having a thick clearcoat is not a want it is a must. Our advanced Clearcoat Fusion Technology doesn't cut away your original clearcoat, but fuses more clearcoat into your paint finish, not only fixing and repairing damage, but giving the vehicle a more brilliant, lustrous, and permanent fix than traditional methods. The result is a faster turnaround time and increased clearcoat longevity keeping your paint finish Factory Forever.

SkyGloss' Clearcoat Fusion Technology is an actual fusion of more high-grade OEM clearcoat into a vehicle's paint finish, building it back up rather then cutting it down. Not only does this build integrity to a vehicle's paint, but also fixes all kinds of clearcoat damage. The finished result is a factory fresh paint finish building integrity versus cuting to down through traditional polishing methods. Clearcoat is the protection mechanism that manufactures use to protect a vehicle's paint. It is the most reliable UV and damage resistant protection a vehicle can have. It's better to think of ceramics or any type of coating not as "protection" but a performance enhancement to the surface. Creating a chemical resistance and high surface tension beyond typical automotive paint finishes. SkyGloss Clearcoat Fusion Technology is not a replacement to coatings, but is the first step you would do before any coating gets applied. It is a way to build the foundation back to a factory fresh integrity and beauty. To give you a comparison of protection thickness, a typical vehicle will take about 25 mL of a typical ceramic coating, SkyGloss FUSION is 250 mL of material per vehicle. Literally 10 times the thickness and that's what matters when it comes to actual protection. Ceramic coatings, and all types of coatings are a very effective way to get beautiful performance out of your paint like a turbo would for an engine.

A few decades ago, polishing made sense. Paint systems were thicker. Clearcoat was deeper. You could afford to remove material to fix a problem because there was enough foundation underneath to support it. That is no longer today’s reality. Over the last 20 years, manufacturers have reduced clearcoat thickness by an average of nearly 100 microns. That thickness was protection. That thickness was margin. That thickness was freedom — freedom to wash, detail, and correct without compromising integrity. Today, most vehicles — even luxury vehicles — are thinner than ever. When you polish modern paint, you’re not just refining it. You’re permanently reducing what little protection remains. Polishing will never disappear. It still has its place for those select vehicles that can afford to lose material. But 90% of today’s vehicles cannot afford that loss. SkyGloss, completely solves this problem by simply building versus cutting. Not only does that solve the integrity issue, but it provides a better more robust permanent finish that will keep your vehicle factory forever.

Your clearcoat is not just shine.

It is structure.
It is protection.
It is integrity.

It is the most important layer on your vehicle.

SkyGloss was built around one simple principle:
Keep the original foundation healthy, beautiful, and thick.

We don’t replace protection systems.
We prepare the surface properly so protection can actually perform.

SkyGloss Clearcoat Fusion Technology restores and builds the clearcoat foundation instead of reducing it — creating a factory-fresh reset without sacrificing long-term strength. From there, you choose your level of continue protection and performance, whether it be SKY RESIN, SKY SHIELD or any type of protection offering out there.

SkyGloss is clearcoat fusion technology is compatible in ax just like high-quality and durable OEM clearcoat.

Thickness is protection.

Clearcoat is the shield that protects your color, your gloss, and the long-term beauty of your vehicle. When manufacturers reduce thickness, they reduce margin. When margin is reduced, even normal washing — will slowly deteriorate the finish.

For decades, we’ve been trained to correct by removal.
But when the material is thinner, removal becomes extremely risky.

SkyGloss shifts the focus from temporary perfection to long-term integrity. We believe paint health is more important than paint correction.
We believe strength creates beauty — not the other way around.
And we believe a vehicle should leave with more foundation than when it arrived.

That is how you keep a vehicle factory fresh.
That is how you keep it factory forever.

But the best thing about it is building more material will always give you a better result. you'll fix more damage you have more integrity and foundation and most importantly, it will be shinier and more vibrant than anytime material is removed.

It's not just that SkyGloss is better, It's that building will always be better than removing.

If you truly have the ability to reset your paint — to rebuild the very layer that was designed to protect it — then protection stops being something you depend on. It becomes something you choose.

Here’s the reality most people never stop to consider:

Your vehicle already has the best protection system ever engineered for it.
It’s called clearcoat.

Manufacturers don’t rely on other coatings.
They don’t rely on wax.
They don’t rely on aftermarket films.

They rely on clearcoat.

Why? Because clearcoat is thicker.
It’s structurally integrated into the paint system.
It provides true UV resistance and protection.
It absorbs impact and friction.
It carries depth, gloss, and long-term durability in a way no topical coating ever can.

Clearcoat isn’t an add-on.
It’s the engineered shield.

And no coating on the market is thicker, more structurally bonded, or more inherently protective than a healthy layer of clearcoat. That’s simply physics.

So if SkyGloss allows you to rebuild and strengthen that original protective layer — the very system manufacturers trust — then no, protection doesn’t matter in the survival sense. You’re no longer compensating for weakness.

But this is important to understand:

Additional coatings, resins, or membranes are not replacements for clearcoat.
They are enhancements.

They add surface slickness.
They increase chemical resistance.
They amplify hydrophobics.
They slow environmental wear.

They’re like adding a turbocharger to an already strong engine.

You don’t need the turbo to run.
But if you want more output, more buffer, more performance — you add it.

Thick, healthy, vibrant clearcoat is not a luxury.
It is the foundation.
It is the true protection. Everything else is performance.

Build the shield first.
Enhance it if you want more horsepower is the most honest and easiest way to think about maintaining vehicles paint

FAQs About SKY SHIELD

SKY SHIELD is a permanent but peelable new paint finish right over top of your original one — a revolutionary protective membrane with a full clearcoat top layer just like your original paint finish that replaces outdated paint protection films (PPF). It’s applied like paint, not wrapped like film, and seamlessly bonds to your vehicle’s surface with no seams or peeling.

Unlike PPF, which can degrade, yellow, or peel over time, SKY SHIELD is:

  • Seamless and edge-free — no tucking or trimming
  • Fully repairable and backed by the most robust warranty in the industry
  • Permanently bonded but peelable when needed
  • Customizable in color and sheen
  • Much glossier and more paint-like in finish

Yes. While it’s designed to last as long as you own your vehicle, it can be peeled off at any time revealing the perfectly preserved factory paint underneath.

Absolutely. SKY SHIELD is covered by the most powerful warranty in the industry guaranteed for 5 years. Any failure, rock chip, or integrity issues are fully covered.

Yes. You can keep your factory color or change it. Choose any sheen from high gloss to matte or anything in between to perfectly match your style.

We recommend full-vehicle coverage for ultimate protection, but you can also opt for a frontend clip (bumper, hood, front fenders) combined with Resin Film on the rest of the car.

  • Full Vehicle Protection:
     Small: $7,999 | Medium: $9,999 | Large: $11,999

  • Frontend Clip with Resin Film:
     Small: $2,395 | Medium: $2,495 | Large: $2,595

SKY SHIELDis a Paint Protection Supershield (PPS) that has far superior advantages over traditional Paint Protection Film (PPF) and is an additional painted surface over top of your original paint, but it is not a coating that wears off, but a new paint layer that can be peeled off at any time, fully protecting your paint underneath. 

SKY SHIELD comes with a robust 5-warranty and fully insured against actual damage. You can read here about the full details of the warranty. It is intended to last for as long as you’d like. It’s a permanent, but peelable option. 

The average turnaround time is 3 days.

FAQs About SKY RESIN

SKY RESIN is a revolutionary service that rebuilds and restores your clearcoat back to health the most important layer of your vehicle’s paint finish rather than cutting it down like traditional detailing and polishing methods. Always leaving you with a net positive outcome of health and beauty, then fully protected with SkyGloss Resin Film that out preforms the tradition Ceramic options that wear quickly. Giving you the best of all worlds keeping your paint finish Factory Forever.

Ceramic coatings sit on top of your paint and work well until they wear off. But that is not the major issue as you can always add another ceramic coating. The issue is no matter what type of coating you have, clearcoat damage and clearcoat wear is inevitable. And before you apply another coating, you have to cut and polish that cars paint again continuously diminishing the very protection the manufacturer is using to protect your paint, your outer clearcoat. SKY RESIN actually rebuilds the clearcoat itself, restoring depth, shine, and integrity and then finishes with a Resin Film coating for extreme hydrophobicity, gloss, and durability. This is giving you the best of both worlds, well ensuring that you always have a net positive outcome on your paint finish health and thickness so it will stay factory forever.

  • Retians clearcoat to factory health without ever polsihing away your protective clearcoat
  • An extra build coating for longer term performance and protection
  • Holds extreme gloss and beauty for vibrant aesthetic look.
  • Hydrophobic and self-healing performance
  • Requires far less frequent maintenance than ceramics

All damge we repair is permanent and guarantee to not ever come back. RESIN is designed to significantly slow down, clearcoat aggregation, scratching and provided brilliant hydrophobic finish. But that is still susceptible to new wear and tear just at a much slower pace.

Any vehicle new or used. Whether you’re looking to preserve your factory finish or restore brilliance to a worn exterior and get that factory beauty again, SKY RESIN is the ideal solution and the best cost effective option for always having a healthy, vibrant and beautiful paint finish.

Most clients find no need for any extra steps to maintain a finish. Think about RESIN like a twin turbos for your engine, they have unbelievable performance, but we do recommend every one to two years to come back in and have the performance checked. Often times a simple wash, and Claybar will revitalize areas that have a lack of proformance.

  • Small: $1,199

  • Medium: $1,299

  • Large: $1,399

Typical turnaround time is 2 days.

FAQs About SKY FUSION

SKY FUSION is like a reset button for your vehicle’s exterior. It restores and rebuilds your clearcoat — correcting issues like scratches, swirls, fading, and clearcoat degradation — without cutting down your paint like traditional polishing or detailing.

Traditional methods remove part of your thinning clearcoat to create a temporary shine. SKY FUSION adds clearcoat back — making the surface healthier and more vibrant, while preserving your paint’s long-term integrity.

SKY FUSION effectively corrects:

  • Scratches and swirl marks
  • Clearcoat thinning or failure
  • Oxidation and fading
  • Road rash and minor surface damage

Yes. The new clearcoat is chemically bonded and permanent. It doesn’t flake or wear off like temporary detailing fixes it restores your vehicle's finish and locks in that result.

We can treat individual panels, but full-vehicle application is recommended for the best results and overall consistency. Just like you wouldn’t wax half your car or change oil on only one cylinder, it’s better to restore the entire surface.

  • Small: $699

  • Medium: $799

  • Large: $899

Additional Services:

  • Headlight Repair: $149

  • Trim Repair: $199

  • Paint Chip Repair: $129

  • Full Panel Repaint (if needed): $600

SKY FUSION typically has a 1-day turnaround.